In this post I’m going to teach you how to make three different hyaluronic acid serums; one with 3 ingredients, one with 5, and one with 8. Each formulation builds on the one before it so you can see how to modify and expand on (or, if done in reverse, simplify!) a serum formulation.
I’ve packed this post full of helpful links, so for the best learning experience please click through and read the ‘bonus’ material as well. Happy making!
Want to watch this project instead of read it?
Post Overview
3 ingredients
This first formulation is as simple as it gets; it’s just an effective concentration of hyaluronic acid diluted in water, with an appropriate level of preservative. Easy peasy!
Hyaluronic acid
Our star ingredient! It is a fabulous humectant and moisturizer that we include in our formulations for incredible hydration and skin plumping. Hyaluronic acid also has undeniable label appeal!
There are two key considerations/sorta-challenges when working with hyaluronic acid: it’s slow to hydrate, and is expensive (generally around $5–7USD/g as of early 2023, though this varies a lot by where you live + how much you buy).
We tackle the slow-to-dissolve challenge by making a 1% stock solution of hyaluronic acid which is then stored and ready to use whenever you need it. I usually make 100–200g at a time, and that’ll generally last me a couple months. I like to make a 1% solution as it’s easy to make, easy to work with, and keeps the math of formulating with it pretty simple. If your formulation includes 10% of your 1% hyaluronic acid stock, the final formulation contains 0.1% hyaluronic acid.
Start Here: How to make a 1% hyaluronic acid stock
Hyaluronic acid is available in a variety of different weights—basically, how big the molecule is. I use what is generally called “low molecular weight”. From Simple Skincare Science: “The hyaluronic you want to use should be between 80,000 to 1,000,000 daltons (80 – 1,000 kDa). This seems to be the sweet spot according to studies. Anything higher won’t do much good. Anything lower might cause inflammation.”
A 1% solution of low molecular weight hyaluronic acid creates a viscous, but pourable liquid. Higher weights will create more viscous solutions; lower weights will create less viscous solutions.
Even more info: Hyaluronic acid Q&A
Regarding that high price tag—we’re looking to get the benefits of hyaluronic acid for the lowest cost, a.k.a. we want to use the minimum effective dose. Thankfully for our wallets, hyaluronic acid is effective at quite low concentrations. Studies mentioned in the article linked above found 0.05–0.2% hyaluronic acid to be beneficial. Another study mentioned in that article (you really should read the whole thing, it’s wonderful!) found that “hydration tends to teeter off after 2% in volume”, and for that reason “if you’re formulating your own products, [Simple Skincare Science] recommend[s] keeping the HA concentration below 2%.”
I usually use 0.2% hyaluronic acid in my formulations, which is 20% of that 1% stock solution. This works out to just over $1USD of hyaluronic acid per 100g (3.5oz) batch of a formulation. You could use more, but I rarely do in order to keep costs down.
An added bonus of the stock solution: the far more forgiving margin of error when weighing it out. If you accidentally weigh out an extra 0.1g of the solution that’s ~$0.001 of extra hyaluronic acid vs. $0.1 if it was pure hyaluronic acid powder.
Distilled water
This is what forms the bulk of the formulation; it dilutes the hyaluronic acid to an effective level and hydrates the skin.
Preservative
Because this formulation contains water, it requires a broad-spectrum preservative. I’m using Liquid Germall™ Plus (INCI: Propylene Glycol, Diazolidinyl Urea, Iodopropynyl Butylcarbamate) as it’s very easy to use and works brilliant in hydrous formulations like this one.
Because my 1% hyaluronic acid stock contains 0.5% Liquid Germall™ Plus, that means this formulation already contains 0.1% Liquid Germall™ Plus. To keep the usage rate within the maximum recommended range, I’ll be adding another 0.4% Liquid Germall™ Plus to the formulation for a total of 0.5% Liquid Germall™ Plus.
The Formulation
Super Simple Hyaluronic Acid Solution
47.76g | 79.6% distilled water
12g | 20% low molecular weight 1% hyaluronic acid solution (USA / Canada / New Zealand) (This is NOT dry powder!)
0.24g | 0.4% Liquid Germall Plus™ (USA / Canada)Weigh everything into a beaker, and stir to combine. That’s it!
This solution is quite thin, so I recommend packaging it in a bottle with a dropper top or an orifice reducer.
Want to watch this project instead of read it?
5 ingredients
For our next formulation we’ll add two relatively common ingredients to give this 5-ingredient version more of a skincare punch and a serum-y feel.
Panthenol (Vitamin B5)
Panthenol (Vitamin B5) is one of my favourite skin care actives. It’s inexpensive, widely available, effective, and adds all kinds of great benefits to our formulations. It boosts moisturizing, softens the skin, and stimulates skin-regeneration. It’s also soothing. Booyah!
I’m using powdered panthenol (Vitamin B5); if yours is liquid, please read the free Humblebee & Me DIY Encyclopedia entry on panthenol (Vitamin B5) to learn how to use that instead.
Xanthan gum
The 3-ingredient formulation is quite watery as there isn’t enough hyaluronic acid in it to give much of a viscosity boost. While you could use extra hyaluronic acid to thicken the formulation, that’s a very expensive strategy. It’s sort of like using your most expensive extra virgin olive oil to lubricate your lawnmower—there are other ways to do that job that are cheaper and just as (if not more) effective!
A small amount of soft xanthan gum gives this 5-ingredient formulation a wee viscosity boost, resulting in a product that feels more serum-y. If you only have regular xanthan gum I’d use half the amount, adjusting the distilled water to keep the formulation adding up to 100%.
If you don’t have xanthan gum you could try a different gelling ingredient or gum instead; I think a 1-for-1 swap to Polyacrylate crosspolymer-6 (Sepimax ZEN), Ammonium Acryloyldimethyltaurate/VP Copolymer (Aristoflex AVC), Hydroxyethylcellulose, or Solagum AX could work well. Other gelling ingredients could work well, too—try it and see!
The Formulation
Soothing Hyaluronic Acid Serum
0.18g | 0.3% xanthan gum (soft) (USA / Canada)
0.24g | 0.4% Liquid Germall Plus™ (USA / Canada)12g | 20% low molecular weight 1% hyaluronic acid solution (USA / Canada / New Zealand) (This is NOT dry powder!)
46.38g | 77.3% distilled water
1.2g | 2% panthenol powder (vitamin B5) (USA / Canada)Weigh the soft xanthan gum and Liquid Germall™ Plus into a beaker. Stir to combine.
Add the hyaluronic acid solution; stir.
Add the distilled water and panthenol (Vitamin B5); stir.
Cover and leave the mixture to allow the soft xanthan gum time to hydrate and activate.
After 20–30 minutes the soft xanthan gum should be all hydrated. Stir the mixture until uniform, and then it’s ready to package!
This formulation is a bit thicker than the 3-ingredient one, but it’s still pretty fluid. I like a bottle fitted with an orifice reducer for formulations with this level of viscosity; this allows me to shake a few drops into my palm to apply. A bottle with a dropper top will also work.
Want to watch this project instead of read it?
8 ingredients
Hydrosol
Swapping 20% of the water in this formulation for a hydrosol of choice (I’m using rose!) adds a bit of gentle scent to the formulation. You can use any hydrosol you like, and you can use more or less to get a stronger (or weaker) scent. Simply adjust the distilled water to keep the formulation adding up to 100%.
You could replace all the distilled water in the formulation with hydrosol, but I usually find this is overkill. 20–40% is generally more than enough to get a noticeable scent.
I like using hydrosols instead of essential oils or fragrance oils to scent watery serums because they’re already water soluble and incorporate really easily. There’s no need for a solubilizer—just swap out some water and you’re off to the races! You also don’t have to worry about maximum usage rates as they’re very gentle.
Allantoin
I love allantoin and think it’s a very under-appreciated, under-utilized ingredient. It’s soothing, boosts skin cell turnover, and is a great moisturizer. It’s effective at low concentrations, and I adore it. Highly recommended! We’re using 0.4% of it, which is an effective dose that will easily dissolve in the formulation (it’s not terribly water soluble).
Hydrolyzed protein
A bit of a liquid hydrolyzed protein—I’m using hydrolyzed rice protein—further boosts the moisturizing properties of the serum. It also gives it a coppery colour. You could use a different liquid hydrolyzed protein, or a water-soluble botanical extract your skin loves would also be lovely.
If you want to use a dry hydrolyzed protein (silk is the only one I’ve found), you’ll want to use it ~0.8–1% as a solid powder is more concentrated than liquid proteins.
The Formulation
Extra Moisturizing Hyaluronic Acid Serum
2.4g | 4% hydrolyzed rice protein (USA / Canada)
0.24g | 0.4% Liquid Germall Plus™ (USA / Canada)
0.18g | 0.3% xanthan gum (soft) (USA / Canada)12g | 20% low molecular weight 1% hyaluronic acid solution (USA / Canada / New Zealand) (This is NOT dry powder!)
12g | 20% rose hydrosol (USA / Canada)1.2g | 2% panthenol powder (vitamin B5) (USA / Canada)
0.24g | 0.4% allantoin (USA / Canada)31.74g | 52.9% distilled water
Weigh the soft xanthan gum and Liquid Germall™ Plus into a beaker. Stir to combine, and then add the protein. Stir again.
Add the hyaluronic acid solution and rose hydrosol, stirring between additions.
Add the panthenol (Vitamin B5) and allantoin; stir.
Add the distilled water; stir.
Cover and leave the mixture to allow the soft xanthan gum time to hydrate and activate.
After 20–30 minutes the soft xanthan gum should be all hydrated. Stir the mixture until uniform, and then it’s ready to package!
This formulation is a bit thicker than the 3-ingredient one, but it’s still pretty fluid. I like a bottle fitted with an orifice reducer for formulations with this level of viscosity; this allows me to shake a few drops into my palm to apply. A bottle with a dropper top will also work.
Want to watch this project instead of read it?
Other Questions
How long will these serums last?
These serums should easily last at least a year—likely closer to 2.
How should I use these serums?
I like to apply hyaluronic acid serums after cleansing and before oil serums and/or creams. If you’re using my Easy DIY Vitamin C Suspension (Just 3 ingredients!) these hyaluronic acid solutions are perfect for palm mixing with it to pre-dissolve the L-ascorbic acid in the moment before use.
For best results, I do recommend following up these serums (and any watery serums/toners/solutions) with a cream or oil serum to help keep the hydration in.
Can I use more hyaluronic acid?
You can, but you don’t need to. It’s a really expensive ingredient, so I opt for a low-but-effective concentration.
Why do big companies use higher concentrations of hyaluronic acid?
Probably because they’ve got far stronger purchasing power than we do, so they can really drive the cost per gram down when they buy their hyaluronic acid 1000kg at a time. Studies have shown 0.2% is effective, but for consumers who haven’t read those studies, 2% sounds better.
Relevant links & further reading
- Hyaluronic Acid in the Humblebee & Me Encyclopedia
- Allantoin in the Humblebee & Me Encyclopedia
- Liquid Germall™ Plus in the Humblebee & Me Encyclopedia
- Panthenol (Vitamin B5) in the Humblebee & Me Encyclopedia
- Hydrolyzed Rice Protein in the Humblebee & Me Encyclopedia
- Xanthan Gum in the Humblebee & Me Encyclopedia
- What’s up with hydrosols, distillates, and floral waters? in the Humblebee & Me FAQ
- How long will ______ last? What is its shelf life? in the Humblebee & Me FAQ
- Can I use a different preservative than the one you’ve used? in the Humblebee & Me FAQ
- More information on hyaluronic acid:
- More formulations using hyaluronic acid:
Gifting Disclosure
The Liquid Germall™ Plus, panthenol, and hydrolyzed rice protein were gifted by YellowBee.
The allantoin, rose hydrosol, and niacinamide (Vitamin B3) were gifted by Essential Wholesale.
The soft xanthan gum was gifted by Formulator Sample Shop.
The hyaluronic acid was gifted by Pure Nature.
Links to Amazon are affiliate links.
I wonder if I could add vitamin C (sodium ascorbyl phosphate to be exact) to this serum since it’s water soluble?
I am wondering the same thing?
Wondering the same! Let me know if you try it out!
What a wonderful post! Love the pictures! Thank you, I’m on my way to mix one with another preservative.
Denise, I can’t speak for Marie but I think it could maybe work. I’d love to hear how it goes if you give it a go?! I prefer LAA supension (mixed with Brighten and Boost Serum) over any SAP serums I’ve tried because it seems to be more stable and versatile when it comes to skin benefits I’ve experienced. I’d leave enough room for citric acid etc as SAP tends to make pH higher and stabilize pH with something (I’ve used sodium citrate+ citric acid or sodium lactate if I’m planning to preserve it more than just a month or so). Lack of propanediol or other diol might cause some issues.
Made the extra moisturizing hyaluronic acid serum with 0,8 % pineapple extract powder & 40 % neroli hydrosol & phenoxyethanol + ethylhexylglycerine & hydroxyethylcellulose and I love it!
I think this is very nice budget friendly hydrating serum without peeling / pilling issues. My other serums contain too much HA so this is also much less sticky than those. This feels very nice on my skin.
I’ve been enjoying allantoin+ panthenol+ proteins blend ever since you introduced it to me years ago so this took me to a nostalgy trip too. Thank you ❤️
Could I make a base stock of the HA solution using 0.5 grams of low molecular weight and 0.5 grams of high molecular weight? I’d like to get the benefits of both weights. Thanks
Leslie, that’s what I’ve been using lately since I didn’t quite have enough of either the LMW or HMW to make the 1% base. Also, I like how the HMW gives it a bit more viscosity.
Oh my god, you’ve read my mind. I’ve got answer to my questions now! Thank you!!!
hi and what is the PH range ?
Thank you, our sweet bee.
could we add niacinamide and vitamin c to any of the serums?
I love it, I have been thinking of a HA solution for your C suspension, and here it is! Thanx for give a bit of instruction for that in the artucle
Would it be ok to omit the Xanthan Gum and add Allantoin in the 5 ingredient formulation?
Please help me here … is there a possible reason why my 1% HA stock solution doesn’t not turn out clear but rather opaque when I make it myself ? I use liquid Germal plus preservative & glycerine In my formula
I’m wondering if you ever received a response, I have a similar situation. My solution turned out opaque and gelatinous. If anyone can tell me why I’d appreciate it. It’s not unusable. I just don’t get the same results as the pictures. This has happened to me with the Latin Acid Serum as well. Any advice would be appreciated.
It looks like there is a typo in the Super Simple Hyaluronic Acid Solution formula above. 12g (20%) is extremely way too much H.A. powder.
Here is another version which makes 100g of the Super Simple H.A. Stock Solution from Marie’s “Start Formulating With Hyaluronic Acid” post:
1g (1%) hyaluronic acid powder
0.5g (0.5%) liquid germal plus
98.5g (98.5%) distilled water
its not HA Powder its Hyaluronic Acid solution 🙂
En que concentración suele venir el germall plus? veo que dicen usar al 0,4%, habría que hacer una dilución a partir del envase original?
Love your site and wonderful recipes. Can you add glycerin to the serum ? Thank you for sharing your site.
I doubled the 3 ingredient recipe and before I could even stir it, it was a giant mass of gel so hard I had to cut it apart. I ended up breaking the mass into small pieces and shoving into the small bottle I had selected. I then added lots of water in hopes that the hard stuff turns soft and liquid. I put the rest in a jar, again with lots of water.
The HA does not tell me what grade it is. Do you have any idea what went wrong? I weighed every ingredient.
I think I discovered what went wrong. I doubled the simple recipe which called for 24 grams of HA. When I was pouring on the scale, it was very light and I kept having to keep pouring to get to 24 grams.
I looked at other recipes and they almost all called for 1/8 of a teaspoon. My 24 grams looked like multiple Tablespoons. My two containers are now solid, even after adding a lot of water. I may keep diluting to get to a serum like consistency.
It should be 24g of the 1% low molecular weight hyaluronic acid solution. NOT 24g of LMW HA powder.
The 1% HA solution should be made first with 98.5% distilled water, .5% liquid germall + and 1% HA.
Could herbal infusions be used in place of the water for some added benefits??
Hello, there are only phenoxy and paraben preservatives in my country, which one can I use?
Hi Marie, instead of the rice protein, can I swap for a small amount of turmeric powder?
Hi Marie! Thank you so much for this! I made the 8 ingredient version and it’s now part of my daily routine. I used a jasmine hydrosol and put it in a pump bottle. It has an amazing skin feel and my skin looks and feels so hydrated. Thanks again!
In the 8 ingredient can you omit the allantoin? I don’t have it and trying not to buy more stuff. I guess that would be a 7 ingredient lol.
Also I only have heavy weight HA. How would that change the formula or would it?
Thank you! I really want to try a formula from this to make my serum.
I find that the HMW HA 1% solution is a great gel. I’ve started combining the SLMW and the HMW 1% solutions to get a more hydrating serum though. But it should be the same amounts. It’ll just be a little more gel-like.
Hi!! Approximately how long should my HA stock be good for?
I would say that it depends on how it’s stored and what preservative is used. In a dark, cool place it should last at least 6 months.
I have made the 5 ingredient serum and it turned out great. Thank you Marie!
I would like to replace a store bought serum with it. The store bought also has ceramides. I have searched and you have a ceramide serum and I understand HA and ceramides work well together so how would I add ceramides to the HA serum? Just displace an equal amount of the distilled water for ceramides I add?
I see Windypoint is selling ceramides again whooohooo
Trying to figure out which weight to order from LotionCrafter. They have 80,000 – 110,000, which is “Extra low” weight, and also 800,000 – 1 million, which is “low” weight. Both ends of this spectrum are covered in what you recommend (80,000 to 1 million), so….which should I go with?
Hi Katie! I don’t think you can go wrong choosing one or the other 🙂 The HA I use the most often is 800,000–1 million daltons and I love it, so if you’re looking for a nudge in either direction, go with the “low” weight version.
For everyone debating HMW vs LMW hyaluronic acid: they genuinely do different things at the skin level. HMW (>1000 kDa) forms a viscoelastic film on the surface that reduces transepidermal water loss — it’s your immediate hydration and plumping effect. LMW (20–200 kDa) can penetrate deeper into the epidermis and actually signals keratinocytes to upregulate their own HA production. There’s a 2011 study in the Journal of Drugs in Dermatology showing that a multi-weight HA approach (combining both) outperformed single-weight formulations in both hydration depth and duration. So if budget allows, blending 50/50 as some commenters mentioned is genuinely the best strategy — you get surface film-forming plus deeper tissue hydration in one product.